AJEC Pricing — Every Service, Every Price
No gatekeeping. No "call us for a quote." Find the cost of exactly what you need below.
All prices before HST (13%). Book a free call for an exact project quote.
Prefer to watch? Jack explains exactly what drives pricing — in under 3 minutes.
Performance path modelling to meet SB-12 — detached, semi, townhouse, or stacked. We find the most cost-effective way to meet requirements so you’re not overpaying for upgrades you don’t need.
Includes: one set of energy drawings, blower door test coordination, full compliance report.
Post-construction revisions ($200/hr), additional consultations ($200/hr), and additional blower door tests ($350/test) are available as needed. iOur role is to filter information so you can make the most suitable decision for your project. Have a product or spec in mind? We’ll always check and confirm it for you at no charge — before it’s installed. These charges only apply when installed equipment or assemblies don’t match our pre-construction spec. If what’s installed meets or exceeds requirements — no charge, no revision needed. If it falls short, a post-construction review is triggered.
One fee covers all units of that model type in your subdivision — you pay per model, not per house.
| Project Type | Price |
|---|---|
| Single Family (Detached, Semi, Townhouse, Stacked) | $300 – $500 per model type |
| Multi-Unit Residential Building (MURB) | $300 per unit type |
Post-construction revisions ($200/hr), additional consultations ($200/hr), and additional blower door tests ($350/test) are available as needed. iOur role is to filter information so you can make the most suitable decision for your project. Have a product or spec in mind? We’ll always check and confirm it for you at no charge — before it’s installed. These charges only apply when installed equipment or assemblies don’t match our pre-construction spec. If what’s installed meets or exceeds requirements — no charge, no revision needed. If it falls short, a post-construction review is triggered.
What affects the price? The $300–$500 spread depends on design complexity and elevation variation. Simpler, standardized designs land at the lower end. We’ll tell you exactly where your project lands on your first call — before you commit to anything.
AJEC has national partnerships to handle both the paperwork and on-site services. Same team, same process, consistent results. Contact us with your project details.
Full bundle covering all three CMHC requirements in one engagement.
| Service | Price |
|---|---|
| CMHC Energy Modelling Package | $400 – $500 per unit + report package |
| Post-Construction Verification | $150 per unit |
| Post-Construction Blower Door Test | $350 per unit |
| OBC SB-12 EEDS Add-On (Ontario only) | $200 per unit |
Post-construction revisions ($200/hr), additional consultations ($200/hr), and additional blower door tests ($350/test) are available as needed. iOur role is to filter information so you can make the most suitable decision for your project. Have a product or spec in mind? We’ll always check and confirm it for you at no charge — before it’s installed. These charges only apply when installed equipment or assemblies don’t match our pre-construction spec. If what’s installed meets or exceeds requirements — no charge, no revision needed. If it falls short, a post-construction review is triggered.
| Service | Scope | Price |
|---|---|---|
| EnerGuide — Modelling | Energy model by model type | $300 per model type (up to 5 elevations) |
| EnerGuide — Inspection & Labelling | On-site inspection + EnerGuide label | $500 per unit |
Additional elevations are charged at $150 each.
Post-construction revisions ($200/hr), additional consultations ($200/hr), and additional blower door tests ($350/test) are available as needed. iOur role is to filter information so you can make the most suitable decision for your project. Have a product or spec in mind? We’ll always check and confirm it for you at no charge — before it’s installed. These charges only apply when installed equipment or assemblies don’t match our pre-construction spec. If what’s installed meets or exceeds requirements — no charge, no revision needed. If it falls short, a post-construction review is triggered.
| Service | Scope | Price |
|---|---|---|
| ENERGY STAR® — Plan Analysis | BOP creation, design only | $300 per model type (up to 5 elevations) |
| ENERGY STAR® — Performance Inspection (v17.1 Rev 2) | Performance path | $650 – $850 per house |
| ENERGY STAR® — Prescriptive Inspection (v17.1 Rev 2) | Prescriptive path | $400 – $600 per house |
Additional elevations are charged at $150 each.
Post-construction revisions ($200/hr), additional consultations ($200/hr), and additional blower door tests ($350/test) are available as needed. iOur role is to filter information so you can make the most suitable decision for your project. Have a product or spec in mind? We’ll always check and confirm it for you at no charge — before it’s installed. These charges only apply when installed equipment or assemblies don’t match our pre-construction spec. If what’s installed meets or exceeds requirements — no charge, no revision needed. If it falls short, a post-construction review is triggered.
| Project Type | Service | Price |
|---|---|---|
| Single Family | Energy Modelling & Value Engineering | $2,000 – $2,500 |
| Single Family | Inspection & Labelling | $1,500 |
| Multi-Family | Energy Modelling & Value Engineering | $2,000 – $2,500 |
| Multi-Family | Inspection & Labelling | $700 per unit |
Post-construction revisions ($200/hr), additional consultations ($200/hr), and additional blower door tests ($350/test) are available as needed. iOur role is to filter information so you can make the most suitable decision for your project. Have a product or spec in mind? We’ll always check and confirm it for you at no charge — before it’s installed. These charges only apply when installed equipment or assemblies don’t match our pre-construction spec. If what’s installed meets or exceeds requirements — no charge, no revision needed. If it falls short, a post-construction review is triggered.
For all on-site services (blower door tests, site inspections, and training visits), we charge $0.68/km calculated both ways from our office. Travel charges are always confirmed upfront before we schedule.
A complete reference guide for site supers and trades. Covers every key detail needed to build airtight envelopes consistently across every unit — so your crew isn’t guessing on the job site.
Includes: envelope detailing standards, air barrier continuity diagrams, common failure points, and blower door preparation checklists.
| Option | Price |
|---|---|
| Per visit (up to 6 milestone visits) | $1,400 per visit |
| All 6 visits — save $2,500 | $5,900 all-in |
On-site training for your site supers and trades at key construction milestones — foundation, framing, rough-in, insulation, pre-drywall, and final. Jack or a senior advisor walks the site, flags issues before they become blower door failures, and makes sure your whole crew knows exactly what to do differently next time.
Builders who work with us regularly get better rates on every project. If you’re building more than a handful of homes per year, membership pays for itself quickly.
- 10% off all custom home projects
- 5% off all production builder projects
- Priority turnaround on all reports
- Dedicated account manager
- Direct access to Jack to answer your questions
- Support from senior management on your projects
Membership is never required — most clients start with one project, see the value, and join later.
| Service | Price |
|---|---|
| Post-Construction Energy Modelling Revision | $200 / hour |
| Additional Consultation | $200 / hour |
| Additional Blower Door Test | $350 / test |
Minor revisions (updated window specs, small design tweaks) are included at no extra charge. These rates apply to major scope changes.
- Additional drawing sets: Each service includes one set of drawings, up to 5 elevations. Additional elevations are $150 each. Full-height and walkout basements are treated as separate model types.
- Design revisions after modelling begins: If your architect significantly revises the design, a revision fee may apply.
- Site visits and travel: Blower door tests are coordinated by AJEC but conducted on-site. Travel fees may apply outside the GTA.
- Rush turnaround (under 5 business days): Available — ask about pricing on your first call.
- Province-specific code supplements: Some provinces require additional documentation. We’ll flag this upfront.
We don’t surprise you with invoices after the fact — we always tell you before any extra work begins.
Estimate Your Project Cost iThis estimate gives you a realistic ballpark. Your final price is confirmed in a written fee proposal before any work begins.
What Does AJEC Save You?
The question isn’t just what AJEC costs — it’s what the wrong path costs you.
Builders who stay on the SB-12 prescriptive path often overspend on windows, insulation, or mechanical systems that a custom energy model would show aren’t necessary. We’ve seen builders save $3,000 to $12,000+ per unit simply by switching to performance path modelling.
On a 20-unit project, that’s $60,000 to $240,000 in construction cost savings — for a modelling fee a fraction of that size.
See How AJEC Works
A 90-second overview — from design drawings to occupancy, one team, one point of contact.
Get Your Custom Quote — Free, in 15 Minutes
Every project is different. Book a free call with Jack Zhou, Master Energy Advisor and President of AJEC, and we’ll review your drawings, recommend the right service mix, and give you an exact price — no obligation, no pressure.
Book My Free Call All prices listed are before HST (13%). Prices are subject to change. Contact us for a project-specific proposal.
